RoboPlow Will Clear Your Driveway Of Snow While You Have Breakfast!!
Remote Control Snow Plow
The Roboplow is a remote controlled snow plowing machine. Weighing in at nearly 1000 lbs, the machine has an NPC T74 Motor and an ATV snowplow attachment on the front. It’ll plow up to 20 inches of snow, and runs for an hour on a single charge.
The effective range of the remote control is 5 city blocks, but the robot will automatically stop if it doesn’t receive a signal from the controller.
The inventor spent $8,000 building his prototype.
Check out our video at the bottom of this page for a detailed discussion and demonstration of this custom robot!
- Chassis: Custom Aluminum chassis made of 3/16″ thick aluminum. Cut on our CNC Plasma and welded together to house all the components including the mount for the included snow plow
- Motors: (Qty 6) IG90 24VDC 127 RPM Gear Motor
- Axles: Chain coupled axles for greater off-road capability.
- Lighting: High power 80W head lights for maximum visibility.
- Batteries (Motors): (Qty 2) 12v 55 amp hour batteries in series for 24 volts. There is space for an additional 2 batteries for double the run time and more weight for traction, etc.
- Motor Controller: Sabertooth Dual 60A motor driver
- Remote Control: Spektrum DSMX DX6i Transmitter and Spektrum R9020 9-Channel DSMX X-Plus Receiver (Fail Safe)
- Wheels, Shafts and Bearings:
- (Qty 6) 13″ inch tiller tires
- (Qty 6) Custom steel shafts 1 inch in diameter
- (Qty 6) pillow block 1 inch ball bearings
- Snow Plow Attachment: 52″ wide snow plow blade mounted to the front of the robot with an air cylinder for remotely lifting and lowering the blade. Tilt is manual, contact us if you want that to be remote too.
- Other accessories:
- 24 Volt Coil
- 12 Volt Coil
- (Qty 2) Battery Chargers
- BattleSwitch Radio Controlled 10A Relay
- Air Solenoid Valve
- Air compressor
- Pressure Switch, Air Fittings and tubing, valves, etc.
- Air Tank
- Dimensions and weight:
- Weight: 393lbs
- Dimensions: 38 1/2″ Wide (outside wheel to outside wheel) x 16″ Tall x 63 1/2″ Long (including blade)
- Dimensions (Snow Blade): 52″ x 16″